Call: 704-392-0110
Stromab CT600

Stromab CT600 Angle Cutting

CT600 Spec Sheet

AUTOMATIC UP-STROKE SAW FOR ANGLES CUTTING

CT600

TECHNICAL SPECIFICATIONS : CUTTING UNIT

  • Pneumatic up-stroke saw with rotating table
  • Motor power 10 HP
  • Blade diameter: 600 mm F=30 Z=48 S=5
  • Blade speed: 2575 RPM
  • Cutting cycle: 4 seconds
  • Angles available -70° to 0 to +70° (optional: -80° to 0° to +80°)
  • Table rotation by toothed belt
  • Angle setting by reading on magnetic strip
  • Angle positioning from 0° to -70°: 1.3 seconds
  • Positioning precision +/- 0,2°
  • Adjustable saw blade stroke by pneumatic control
  • Saw motion: fully automatic with pusher system or manually with two hands safety button system.
  • N°02 Vertical hold-down cylinders
  • N°02 Horizontal front pressure plates
  • Cutting capacity at 0°: mm. 160 x 310, 80 x 390
  • Cutting capacity at +/- 45°: mm. 160 x 220, 80 x 270
  • Cutting capacity at 70°: mm. 160 x 100, 80 x 130
  • Dust extractions outlet: (3) Ø 100 mm and (1) Ø 120 mm

MAIN SYSTEM:

  • 12 Inch TOUCH-SCREEN controller
  • MICROSOFT WINDOWS operating system
  • Cutting list entered by TOUCH-SCREEN, remote PC via USB port or via Ethernet
  • Import file .BTL

WORKING SOFTWARE

  • Up to 1,000 cutting lists. Cut list:
    • Board length
    • Trim cut
    • 1° size……10° size
  • Cutting cycle with 10,000 programmable sizes in sequence
  • (4) Optimizing criteria
    • Longest length
    • Minimum waste
    • Sequence
    • Priority length

TECHNICAL SPECIFICATIONS : ELECTRONIC PUSH-FEED SYSTEM

  • Useful length 3000 – 14000 mm (118″ – 551″)
  • Feeding by precision rack and pinion system and brushless motor
  • Maximum pusher speed : 396 Feet per minute
  • Positioning reading with motor brush-less encoder.
  • Tilted working table
  • Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning for next piece
  • Photocell on pusher reads the board length
  • Positioning precision +/- 0,4 mm.

ACCESSORIES ON REQUEST

  • Defecting camera for picking up chalk marked defects.
  • Wood mapping during pusher return
  • Automatic chain loading system
  • Automatic out-feed sorting units with belt and rapid kickers
  • Trap door to expel trim and waste
  • Inkjet printers
  • CAD-CAM software to export ASCII cutting files from remote optimizing softwares as Cad-Works, Sema, Dietrich, Ardis, Logico and more.
  • Industrial PC with Windows operating system.

ADDRESS

Address:
2747 A Interstate St.
Charlotte, NC 28208
F - (704) 394 - 0410

Location